Contents - Index

Printer Settings/Options

This area is where you can set up your printer options.  You can set up multiple printers if you have the need for this option, such as if you have installed this program on a laptop that is moved to different printers, etc.

Normally, you would only be concerned with one, and that would be the default printer.  

The fields are available on this screen are as follows:

Printer Name: - This is just a name that describes the printer.  The system comes with one already defined called "Default"  You can change this or add as many as needed..

Env. Direction: - This is the Envelope Direction that describes to the program which direction your Envelope is fed into your printer.  Now, every printer on the market seems to be designed a little bit different, so we could not assume which way it is fed.  Normally if using a Laser Printer, they are Facing up, which means that the top face of the envelope faces up, so you would select that option.  Most InkJet Printers, actually feed the envelope upside down through the printer, so we added the option - Inverted - Upside down/InkJet.  Select the option that suits your printer.

Feeder Position: - This is the Feeder Position option that describes to the program where the envelope feeder is located on your printer.  You have a choice of either Left, Center, or Right.  just select where your printer feeds the envelopes from.

Orientation: - This is the Orientation option that describes to the program how the envelope printing is oriented on your printer.  Most print in Landscape mode, but there are few out there that actually prints in a portrait mode.  Select the one that is correct for your own printer.

Feeder Type:  Here is a list of options that describe where the printer feeds from.  It normally would be the Envelope Feeder, but if you printer does not have an Envelope printer, then select the appropriate setting.

Display Load Envelope Message:  This option will prompt you to load an envelope after each one is selected to print.  This gives you an option to load the printer before actually printing.  This is a personal preference as to whether to display the message or not.

You can add, delete, modify, etc, by using the navigator.  To add a record, just click on the + (plus) sign, or the - (minus) sign to delete.


Back to Help Contents